Vintage Tools


   
 

Woodworking


 

Ebonizing Wood - The Manufacturer and Builder, 10/1894

 

To make woods, such as cherry, mahogany, etc., look like ebony is often desirable.  A correspondent gives the following directions:

  • To imitate black ebony, first wet the wood with a solution of logwood and copperas, boiled together, and laid on hot.  For this purpose 2 ounces of logwood chips, with 1 1/2 ounces of copperas, to a quart of water, will be required.

  • When the work has become dry, wet the surface again with a mixture of vinegar and steel filings. This mixture may be made by dissolving 2 ounces of steel filings in one half-pint of vinegar.

  • When the work has become dry again, sand-paper down until quite smooth.

  • Then oil and fill in with powdered drop-black mixed in the filler.

Work to be ebonized should be smooth and free from holes, etc.  The work may receive a light coat of quick-drying varnish, and should then be rubbed with finely-pulverized pumice stone and linseed oil until very smooth.

Related Info


468x60

Infill Planes



   

Copyright 2005-2017, wkFineTools.com and Wiktor Kuc.  All Rights Reserved.  Designated trademarks and brands are the property of their respective owners.
No part of the content from this website can be reproduced by any means without specific permission of the publisher.
Valid CSS!